The SONAbeam™ 155-E supports E3, DS3, OC-1/STM-O
, 10/100 Ethernet or datarate transparent transmission and offer the added
reliability of clock data-rate recovery (CDR). Additionally, the SONAbeam™
155-E can be managed over Ethernet and is IP addressable.
| Free-Space Optical |
 |
| Transmission rates |
|
10 - 160 Mbps (datarate transparent or reclocked)
Clocked datarates: E3, DS3, 100base-T, OC-1/STM-0, OC-3/STM-1 |
| Operational range |
|
3 dB/km clear air: 50 m to 3300 m (160 ft to
2.1 mi)
10 dB/km extreme rain: 50 m to 1620 m (160 ft to 1.0 mi) |
| Laser output power |
|
100 mW (2 transmitters at 50 mW) |
| Free-space wavelength |
|
1550 nm |
| Transmitter type |
|
Directly modulated laser diode |
| Receive aperture |
|
10cm (4 in) diam. (effective clear aperture) |
| Mechanical / Electrical
/ Environmental |
|
| Operating temperature |
|
-30 to 50°C (-22 to 122°F) |
| Solar filters |
|
2 spatial, 2 spectral |
| Pointing stability |
|
120 km/h (75 mp/h) operating,
>160 km/h
(100 mp/h) survivability |
| Environmental seal |
|
Water-tight, IP66 and NEMA-4 certified |
| Dimensions (W*H*D) |
|
cm: 25 x 33 x 46 (in: 10 x 13 x 18) |
| Weight |
|
Optical Head: 10 kg (22 lbs); |
| Input voltage |
|
22-57 VDC or 85-260 VAC |
Power consumption (electronics
& heater)
|
|
30 watts, max |
| Carrier-Class Reliability
and Durability |
|
| Window heating |
|
Prevents fogging, snow/sleet accumulation |
| Laser cooling |
|
Cast aluminum heat sink |
| Redundant transmitters |
|
2 independent lasers, drivers |
| Power supply |
|
Telco grade >550,000 hours demonstrated at 25ºC (77ºF) |
| Structure |
|
Cast aluminum and steel housing & mount |
| Service life |
|
15 years |
| Element Management and
Control |
|
| Management interface |
|
Serial (DB9 or RJ-45) and 10baseT |
| SNMP |
|
Embedded v.1 agent |
| GUI control program |
|
SONAbeam™ Terminal Controller STC |
| Command line interface |
|
Via RS232 or IP address |
| Key parameters monitored |
|
Receive signal strength
Laser modulation current
5V internal supply voltage
5V internal supply current
Internal temperature
Interface card type inserted
Input signal presence
FSO data lock
|
| Certifications and Classifications |
|
| |
|
USA |
Canada |
International |
| Laser safety |
|
CDRH 21 CFR 1040 inlcuding Laser Notice 50, Class 1M
ANSI Z136.1 & Z136.6, Class 1 |
CDRH 21 CFR 1040 inlcuding Laser Notice 50, Class 1M |
IEC 60825-1 Class 1M |
| EMC |
|
FCC - Part 15 |
ICES - 003 |
EN55022 - emissions
EN55024 - immunity |
| Electrical safety |
|
UL 60950 |
CSA 60950 |
EN60950
(CB scheme) |
| Interface Cards (select one card) |
| 1) Option: "MMF" - MM fiber-optic interface card, datarate-transparent |
|
Interface type
|
|
Multi-mode fiber, SC terminated |
Data transmission
|
|
Datarate-transparent, 1.5 - 160 Mbps |
Fiber xmtr wavelength
|
|
1310 nm nominal (1280 nm to 1335 nm) |
Fiber rcvr wavelength
|
|
1310 nm nominal (1280 nm to 1335 nm) |
Fiber xmtr output power
|
|
-20 dBm (min), -14 dBm (max) |
Fiber rcvr intput power
|
|
-30 dBm (min), -14dBm (max) |
3R clock & data recovery (CDR)
|
|
User selectable
Bypass for rate-transparency or mux |
| 2) Option: "SMF" - SM fiber-optic interface card, with CDR, and CDR bypass for datarate transparent |
|
| Data physical interface |
|
Single-mode fiber, SC terminated |
| Data transmission |
|
Datarate-transparent, 1.5 - 160 Mbps (reclocking done in mux) |
| Fiber xmtr wavelength |
|
1310 nm nominal (1280 nm to 1335 nm) |
| Fiber rcvr wavelength |
|
1310 nm nominal (1280 nm to 1335 nm) |
| Fiber xmtr output power |
|
-15 dBm (min), -8 dBm (max) |
| Fiber rcvr input power |
|
-31 dBm (min), -3dBm (max) |
| 3R clock & data recovery (CDR) |
|
User selectable
Bypass for rate-transparency or mux |
